Wider windows may require a third bracket centred to keep the pole from bending from the weight of the curtains. A cordless drill with a screwdriver bit makes this job much easier. Measure the window to be decorated and purchase curtains and pole accordingly. Make adjustments if necessary, and then drill starter holes with drill. Levelling the curtain pole is as important as making sure the pole and curtains are the right size for the window. Length of the curtains should either be longer than the window or almost reach the floor. Curtain pole brackets should be mounted equidistance from the window edges, approximately 3 to 5 inches from the edge of the window. Whatever type of pole or curtain chosen, a few rules need to be observed to ensure a job well done. Rods of smaller sizes can be cut with a pipe cutter or metal hacksaw with 28 teeth per inch.. Use a mitre box and pull China FR Coated Fabrics Factory saw for a wood pole. Make corrections is needed, then hang curtains. For example, a 30 inch window requires a 35 inch pole. If the curtain pole consists of two pieces, shorten both parts by equal amounts so the joint remains centred. Some curtain poles are too long for the project at hand. Basic tools needed to accomplish putting up a curtain pole: - Curtain pole - Brackets - Screws - Level - Tape measure or 12 inch ruler - Pencil - Drill - Screwdriver This would be the perfect job to use a cordless drill with a screwdriver bit. Curtain poles have become the latest in fashion, adding flair to an otherwise utilitarian accessory with the various poles and finials of wood and metal. The curtain pole is longer than the window width and should have the same amount extending either side of the window edge. Check with level and check distance from window edge before drilling holes. Inspect for loose screws or fittings. Use the curtain pole to verify level by suspending the pole above the window edge and mark with a pencil level for each end. Some curtain poles include hanging hardware, some do not. Mount the curtain pole over brackets. Use a pencil and mark where to place the brackets by marking the screw holes of the bracket on the wall. Window curtains add a new perspective to a room by dressing up a window with added colour and light control. Make sure you have the proper hanging hardware for the curtain pole chosen, including screws. Curtain poles vary in size so be sure to purchase a pole at least five inches longer than the width of the window. Line up the holes of each bracket over the starter holes and insert screws with a screwdriver.

نظرات شما عزیزان:

نام :

آدرس ایمیل:

وب سایت/بلاگ :

متن پیام:

نظر خصوصی

 کد را وارد نمایید:

 

 

 

عکس شما

آپلود عکس دلخواه: